This new style MultiPlus 12/1200/50 inverter/charger combination is a powerful pure sine wave inverter, an advanced battery charger with adaptive charging technology and a high-speed AC changeover switch in a single compact housing. The new MultiPlus models are easy to recognize due to the elongated steel/plastic housing (protection class IP 21).

MultiPlus 12/1200/50 inverter/charger specifications:
Input voltage: 12VDC
Output voltage: 230VAC
Output power: 1200VA / 1000W | Peak: 2400W
PowerControl: yes
PowerAssist: yes
Transfer switch: 16A
House battery charging current: 50A
Starter battery charging current: 1A
Recommended battery capacity: 250 - 500 Ah
Battery cable (not included): 35mm²

The MultiPlus 12/1200/50 combines a powerful pure sine wave inverter with a power of 1200 VA (1000 Watt), an advanced battery charger with 50 Ampere adaptive charging technology, and a high-speed AC changeover switch in a single compact housing. This MultiPlus is supplied without the required 35mm² cables.

This latest addition to the MultiPlus family is equipped with PowerControl and PowerAssist functionality. All models are suitable for 3-phase and parallel connection, and have a maximum switching current of 16A. Victron Energy inverter/battery chargers are designed for professional use. They are suitable for a variety of devices with high and low starting powers. The MultiPlus is a multifunctional energy system with sine wave inverter, battery charger and AC changeover switch. The batteries are charged safely, even if the quality of the power supply is low.

Proven reliability
The full bridge plus toroidal transformer topology has proven itself to be very reliable for many years. The inverter is short-circuit resistant and protects against overheating, whether this occurs as a result of overload or high ambient temperature.

PowerControl - Maximize use of limited generator, shore or mains power
A maximum generator or shore power can be set with the Digital Multi Control control panel. The MultiPlus then takes other power consumers into account and only uses the power that is 'left' for charging, so that the generator or shore connection is not overloaded.

PowerAssist – Do more with your generator or shore power
Where peak power is often only needed for a short period of time, the MultiPlus ensures that insufficient shore or generator power is immediately compensated with power from the battery. When the load decreases, the reserve power is used to recharge the battery.

High start-up power
Required to start loads with high inrush current, such as voltage converters for LED lamps, halogen lamps or power tools.

Search Mode
When the 'search mode' is enabled, the power consumption of the inverter at no load is reduced by approximately 70%. The 'search mode' means that the Multi is switched off when there is no load or when it is very low. The Multi will switch on briefly every 2 seconds. If the output current exceeds a set level, the inverter continues to operate. If not, the inverter switches off again.

Programmable relay
The programmable relay is set as an alarm relay by default, which means that the relay is de-energized in the event of an alarm or a pre-alarm (inverter almost too hot, ripple voltage on the input almost too high, battery voltage almost too low).

Remote monitoring and control - optional
Monitor and control your MultiPlus system locally (LAN) or remotely via the Internet from around the world with the free VRM app and the free VRM portal website. Access is possible for multiple operating systems via a telephone, tablet, laptop or PC. The level of control from customizing the MultiPlus to setting up a Geofence for rental vehicles and more is endless. This requires a control device from the GX family.

IP21 models 500VA - 1600VA
The new MultiPlus IP21 models are available in power values 500VA, 800VA, 1200VA, 1600VA in 12V, 24V and 48V voltage values.