Victron Cerbo GX MK2
The Victron Cerbo GX MK2 is the communications center for complete control and maximization of your system's performance, wherever you are. Connection is possible via Bluetooth with the VictronConnect app or via WiFi with the VRM portal.

The Cerbo GX MK2 provides intuitive control and monitoring for all Victron power systems. The list of Victron products that can be connected is endless: inverters, Multis, Quattros, MPPT solar chargers, BMV battery monitors, Lynx Ion + Shunt and more.

Difference of the Cerbo GX with the Cerbo GX MK2
The difference of this Cerbo GX MK2 compared to the Cerbo GX is:
- The MK2 version has two fully functional CAN bus ports, called VE.Can 1 and VE.Can 2. Instead of one VE.Can and one BMS-Can port.
- DeVE.Can 1 port is isolated. On previous models there was no isolated Canbus port.
- The RJ-45 connections are rotated 180 degrees, making it easier to remove the cables.
- All three USB ports are fully functional. The Cerbo GX has two functional connections and one USB connection is intended for power only (to a GX Touch).
- The digital inputs of the Cerbo GX MK2 can count pulses.

Connection to the Cerbo is possible via
Easily connect to the Cerbo GX MK2 via:
- The VictronConnect app via the built-in Bluetooth functionality
- The Victron Victron Remote Management (VRM) portal via WiFi (only possible if online)
- Direct access via the GX Touch 50 display (optional)

NMEA 2000 output
Using the new NMEA 2000 output, the Cerbo GX MK2 can be easily integrated into the network of any boat.

Remote Console on VRM
Monitor, control and configure the Cerbo GX MK2 remotely, via the internet. Everything can also be done remotely. The same functionality is also available on the local area network (LAN).

Perfect monitoring & control
The Cerbo GX MK2 gives you insight into the state of charge of the battery, power consumption, the power generated by your solar panels, the power generated by your generator and even tank levels and temperature measurements. Via the Cerbo you can also easily control the current limit of shore power, (possibly automatically) start and stop of a generator and you can change settings to further optimize the system. With the Cerbo GX you can do it all.

Maximize your system performance
The Cerbo GX MK2 maximizes the performance of your system components in real-time and ensures that they remain perfectly coordinated. With the Dual Core processor and the addition of an extra CAN bus port you can now support even larger systems; closely monitor managed (lithium) batteries while the second port supports up to 25 simultaneously connected VE.Can solar chargers. Using the new NMEA 2000 output, the GX can be easily integrated into any boat's network. Four tank and four temperature ports, as well as 3 VE.Direct ports, 3 USB ports, 4 digital inputs and 2 relays allow you to expand control to a new level.

Easy mounting and configuration
The Cerbo GX MK2 is easy to install and configure.

Connections/Communication ports
The Cerbo GX MK2 contains the following connections:

VE.Direct - 3 separate VE.Direct ports
VE.Can - 2 RJ45 sockets connected in parallel
BMS-CAN - 2 BMS-CAN interface ports
VE.Bus - 2 RJ45 sockets connected in parallel
USB - 3 USB host ports
Ethernet 10/100/1000MB RJ45 jack
Connection for GX Touch 50
WiFi Access Point - Use to connect to Remote Console
Bluetooth
SD card
Power input (power cable included)
Tank sensors 4 pieces
Temperature sensors 4 pieces
Digital inputs 4 pieces
Relay - 2 switchable relays

Links with third party products
The Cerbo GX can be operated using The protocols below communicate with products from equipment from other providers/brands.

Modbus-TCP - Use the Modbus-TCP to monitor and control all products connected to the Color Control GX
JSON - Use the VRM JSON API to load data from the VRM portal

SD card
Additional data storage is possible via an SD card.